Although it was first recorded in 1941 as “tied and dyed” and 1909 as “tied and dyed,” the term “tie-dye” was coined in the mid-1960s in the United States. Pellew described below) for a set of ancient resist-dyeing techniques and their results. Tie-dyeing often involves folding, twisting, pleating, or crumpling cloth or a garment and binding with string or rubber bands, followed by dye application (s).
Fabric manipulations prior to dye application are referred to as resists because they partially or prohibit the dye from coloring the fabric. More advanced tie-dyes include extra phases such as an initial dye application before the resist, several successive dyes and resist steps, and the use of different types of resists (stitching, stencils, and discharge).
Tie-dye, as opposed to traditional resist-dyeing procedures, is distinguished by the use of vivid, rich primary colors and dramatic patterns. Due to the popularity of tie-dye dye in the 1960s & 1970s, several motifs, such as spirals, mandalas, and peace signs, have become clichéd.
Many tie-dyes are mass-produced for wholesale distribution and feature these designs. However, a fresh interest in more sophisticated tie-dye is growing in the fashion industry, characterized by simple designs, monochromatic color schemes, and a focus on contemporary clothes and materials other than cotton.
Making tie-dye t-shirts at home is a terrific weekend project and pastime. It’s also a great way to recycle unwanted garments and turn them into something you’ll want to keep wearing.
One of those clever fashion trends that come back into prominence every couple of years is tie-dying t-shirts. Beginners will find this project appealing because of the print’s adaptability and the variety of ways you can tie-dye t-shirts.
Things you will need to create a tie-dye t-shirt –
- Rubber bands
- Pre-washed t-shirts
- Rubber gloves
- Fabric dyes
- Old bottles with spray attachment
- Warm water
- Deep bowls or trays
Preparing to tie-dye t-shirts
1. Begin by combining the powdered colors with warm water and salt, following the manufacturer’s measurements. We prepared 500ml of each dye color.
2. Fill the clean bottles or cartons with the dye mixtures. Pour the color through a push pinhole or a spray attachment on top of the cap.
3. Through a pinhole or spray attachment on top of the cap, pour the color.
4. Cover all surfaces with a protective sheet, or better yet, dye outside on a sunny day for minimal mess. Tie-dying, despite its potential for disaster, is a fantastic outdoor craft!
How to tie-dye a spiral t-shirt?
1. Start by spiraling the t-shirt or fabric’s center.
2. As you continue to squeeze the t-shirt into the spiral shape, the cloth will eventually coalesce into one large, tight ball.
3. If you’re using more than three colors, you can create more portions using thread or elastic bands.
4. Time to tie-dye, then. As directed by the manufacturer, allow the color to soak in. After rinsing with cold water, it’s time to wash.
How to tie-dye a chevron stripe t-shirt?
The first step is to fold your t-shirt lengthwise into a concertina. There are no limits to how many folds you can do with a t-shirt. The chevrons become smaller as the number of folds decreases.
A pen in the same color as your fabric dye can be used to draw diagonal lines every 10cm on the T-shirt. If you want wider stripes, you can raise this measurement.
Use elastic bands or string to bind the t-shirt in a diagonal pattern. A tightening of the material is required to ensure that no color seeps under the strings.
To create this style, continue to tie the tee shirt in diagonal lines over its full length.
Tie up the t-shirt and place it in a large dish, ready to be colored. Each stripe should be dyed with a different color from your pre-mixed dye.
Leave the dye to soak in for as long as the manufacturer recommends after tie-dyeing. We wanted this top to have a faded, nineties vibe, so we only dyed it for five hours. Once the water runs clear, it’s time to wash it.
How to tie-dye a circle t-shirt?
Starting with your thumb and forefinger, pull little parts of the t-shirt up. Wrap the round section securely with an elastic band or a piece of string, then knot it to keep it in place.
Then, continue to tie off the circles all over the t-shirt
Dip your knotted shirt in the pre-mixed blue dye in a large bowl. The Ocean Blue Dylon dye was utilized in this creation.
4. Continue to press the t-shirt into the dye until it is thoroughly covered. About five minutes is enough time to let the product settle before use.
5. Removing the t-shirt from the dye solution and wringing out any excess dye is the final step. Microwave the t-shirt wrapped in cling film on a plate. Then, microwave on high for 1 minute or so. In addition to saving time, the heat will help the color adhere to the clothing. When the water flows clear, it’s time to wash.
How to tie-dye with ice?
1. Place the wire rack on top of the dyeing dish.
2. Using your damp t-shirt as a canvas, spread out a large handful of ice.
3. On top of the ice and shirt, sprinkle powdered colors.
4. Set the dish aside and allow the dyes to soak in while the ice melts, allowing the pigments to absorb into the dish. As the ice melts, you’ll notice that the colors get more intense. Colors should be allowed to develop and dye for at least 24 hours before use. This can be done by rotating it halfway through, then adding more powder to the top for better coverage. Once the t-shirt has been rinsed in cold water until the water runs clear, it is ready to be washed.
How to tie-dye t-shirts with food coloring?
Alternatively, if you don’t have any dye at home, you can tie-dye t-shirts using food coloring. To protect yourself against food coloring, you must wear clothing that is NOT made from plant-based materials such as cotton or linen. Use a polyester item of clothing in place of cotton.
In one hour, soak your clothing or fabric in a solution of two cups of white vinegar and two cups of warm water.
In 120 ml of warm water, mix eight drops of your food coloring.
Make the patterns using the dye mixture
Rinse it after soaking it for 8 hours.
HOW TO TIE-DYE WITH BLEACH?
You’ve certainly heard of reverse tie-dye, but do you know what it is? I’m going to show you how to do reverse tie-dye or tie-dying with bleach today. It’s really simple to accomplish and produces truly unique effects.
When working with bleach, you should take some precautions, such as working outside and wearing gloves. But, as long as you’re okay working with bleach, the technique is pretty interesting and worth a try.
- bleach (Do not forget to wear gloves)
- any Clothing piece that you want
- small pieces of cardboard
- rubber bands
- metal clips
- small container
- spray bottle
1. First, immerse the fabric in the water while working in a well-ventilated location. I made advantage of my kitchen sink. Wring out the excess water and fold the fabric into various shapes – squares, triangles, rectangles, and so on.
2. Put on gloves and pour bleach into a container straight (that is only used for crafting). Ascertain that there is enough bleach in the container to completely soak the fabric.
3. Folded fabric pieces from step 1 should be submerged completely in bleach.
4. Set a timer for anytime between 2 and 20 minutes. The time it takes for the bleach to sink into the fabric will vary depending on the fabric. However, you should be able to observe a distinct change in the color of the fabric before removing it from the bleach.
5. Remove the fabric from the bleach with your gloves still on or using tongs if you’re satisfied with the colour change. And then rinse it for several minutes in the sink to remove all of the bleach, as well as the clips and cardboard bits. Keep in mind that the color will continue to change until the fabric is cleaned.
6. After washing (without soap), run the fabric through the dryer to heat set it before using.
HOW TO TIE-DYE WITH NATURAL INGREDIENTS?
Materials for making homemade dyes:
- vegetables & spices:
- onion skins (make a yellow or /pink dye)
- red cabbage (for purple dye)
- beets (bright pink)
- avocado pits/skins (blush pink)
- curry powder/turmeric (yellow)
- spinach/mint (green)
- blueberries (blue/purple)
- carrot tops and celery leaves (yellow)
- Stainless steel pot
- Glass jar or stainless steel bowl
1. To dye your clothes, soak them in the dye bucket until they are saturated with the color. Alternate methods include dumping dye over the item in an empty saucepan (using tongs to turn) and laying it on newspaper or another covering.
2. Let your item soak in the dye for at least an hour and up to a day (the exception was curry powder, which dyed quickly).
3. With rubber bands/bindings still keeping the object together, remove it from the dye bath and rinse it under cold running water. As a result of rinsing with bindings removed, we only got a single-colored outcome (no tie-dye).
Now hang it to dry.
HOW TO TIE-DYE YOUR T-SHIRT WITH ACRYLIC PAINT
Things you will need:
- Acrylic Paint
- Rubber Bands
- Empty Spray Bottles
1. A piece of cloth and a cotton T-shirt are required to get started.
2. To tie your T-shirt into the design you choose, get a bag of rubber bands of various widths.
3. Collect a variety of acrylic paint colors as well as a few empty spray bottles. To prevent paint from getting on your work surface, lay out some paper towels or old newspapers to absorb any paint spills.
4. To make sure that there is no paint on the exterior, pour some paint into a spray bottle and wipe the rim to ensure that there is none. Approximately one-fourth of the bottle should be filled with water. Shake vigorously to combine.
5. Create a spray bottle for each color you choose to use. As a result of the large number of children involved, we made seven spray bottles of paint, but you can make less if you don’t want as many colors.
6. deciding on the pattern in which you want to fold your shirt.
7. Folding begins as soon as you’ve agreed on a pattern. Rubber bands can be used to hold T-shirt parts in place.
8. On your work surface, place a few towels or newspapers and buckets. Spritz your T-shirts in this area to prevent spray paint from getting elsewhere. Then, grab your shirt and start spraying! The paint should be directed into the buckets so that it does not splatter you, the ground, or anything else you don’t want it to touch.
9. Once you’ve finished spraying your shirts, lay them out to dry and let the colors settle.
10. Once the shirts have dry, gently rinse them under cold water with the rubber bands remaining connected until the water runs largely clear. While rinsing, make sure to flip your garment over to get all of the leftover color out!
11. Remove the rubber bands from your T-shirt and place them in a safe area.
12. After you’ve finished rinsing your T-shirt(s), hang them to dry.
13. Once they’ve dried, you have a few options. You can hand-wash your clothes or put them in the washing machine with cold water. If you choose the second approach, just don’t put any other laundry in there with it. It is possible that you will need to wash your textiles several times before they are ready, depending on what you select to tie-dye. When there are no more colors left in the sink or machine after washing, you’ll know it’s done.
You have completed your task! Enjoy your new t-shirt, and if you enjoyed this procedure, consider delving deeper into the world of tie-dye.
If you are not ready for this long day of working out with your t-shirt, then why not buy it? At Chillme, you will find some unique designs of tie-dye t-shirts for all sizes. Totally Handmade Tie-Dyed T-Shirt. Silicon-washed and bio-washed 100% cotton t-shirt for maximum comfort. It’s so soft that you’ll think you’re not wearing anything at all when you wear it. It is ideal for everyday wear, especially during the hot summer months in India. This rusty Tie-Dye design makes the print Chill Bro pop! This is a Limited Edition Product. We have a range of Cool & chill tie-dye t-shirts online in India.
FAQ ON THE BLOG
Is tie-dye still in 2021?
Tie-dye has been around for a long time, but it has lately made a resurgence as one of the most important fashion trends of 2021. There are numerous ways to wear vibrant, unique patterns, whether it’s a DIY style or one that’s already designed for you.
What is the best die for tie-dye?
Jacquard Tie Dye Kit, Tulip One-Step Tie-Dye Kit, and Royi Tie Dye DIY Kit
Why is it called tie-dye?
During the 1960s, the term “tie-dye” first appeared in the United States. Hippies began wearing clothing with brilliant colors and psychedelic motifs to oppose the Vietnam War and promote peace and love.
How long will tie-dye last?
Once activated by mixing with water, the dye will last up to 72 hours, thus we recommend utilizing your dye during that duration.
When was tie-dye most popular?
Tie-dye was popular as Protest Art in the 1960s, then as Pop Fashion in the 1970s. These are the most well-known tie-dye decades, but tie-dye gets revived every decade. Tie-dye became popular as a notion; your clothing may be used to express your dissatisfaction.